Support - Downloads

Future releases and updates will be found here for download. At present no downloads are available.

• Version 4.0.1
  • Update phone numbers on all reports to show customer phone numbers in the form of (123) 456-7890
  • Note that if the person puts in the phone number as some number and leaves out the area code it will show as ( ) 456-7890 IE customer phone numbers will show as entered in the customer setup area
  • Fixed tab order on customer screen, Tabbing through fields will go in order from left to right
  • Updated Client Referral report to make the report more legible
  • Added Customer Signup report by date range. This allows you to review the members that signed up during a specific date range.
  • Added Customer Income report by date range. This allows you to review the sales by customers during a period of time. Double click on a customer total to drill down into the customer sales total and get the sales detail during that period of time.
  • Updated the End of Day report to show Purchase Percentage, Actual Sales amount, Actual Tax Amount,
  • Total with Tax, and Average Sale amount. Some people where confused as to what included tax and what did not. Also added new charts for administration review when a specific date range is used.
  • Updated Customer lookup area to show clients in a more legible format
    
  • Updated SQL DB query to pre-sort customer lookup by last name then by first name
    
  • Switched the Last name and first name query box order to match the listing format
    
  • Set the start focus of the customer lookup to put the cursor in the last name field so the user can just start typing
    
  • Set the lookup limit to the first 200 names found
    
  • Updated the Customer Visit Screen with the same Lookup Client Screen Updates
    
  • Removed Charge-Fee From Customer Setup/Update Screen, legacy not used
    
  • Removed Charge-Fee From Administration screen, legacy not used
    
  • Removed Member Type From Administration screen, legacy not used
    
  • Added Customer Rating from 0 to 6 to rate possible sale, member or purchased
    
  • Added Customer Rating report to list members by rating, sorted by name and listed in the date range of when they signed up
    
  • Resolved an issue where when the customer is first setup they will show as “date membership” even if the store is on a visits based membership. The following day the system would report correctly, however the new update will show the correct status immediately.
    1. Corrected Customer Lookup
    2. Corrected Customer Visits
    3. Corrected Customer Update
  • Updated SQL to check for setting up a new account as a last visit date as well as the existing customer visits that would take place afterwards. This resolves a possible issue where the client could get double scanned in the same day if they where setup and then scanned in that day.
    
  • Admin Sales Report journal added. This allows you to print all sales between a specified date range. The report will show sales number, the sales line items, the customer name, sale date & time and totals.
    
  • Resolved issue where the center deletes the first name and last name of a user which in turn would cause a problem when another user was scanned in the system would grab both GUID numbers as if there where two entries. Previous database updates resolved this problem.
    
  • Changed revision numbering to Major, Minor, Build
    
  • Added Receipt reprint screen
    
  • Added a report to show the number of visitors to the center during a specific date range
    
• Version 3.928
  • Changed administration reports “ledger” to “Range Reports”
  • Added Customer Referral Report by date range to range reports section
  • Changed administration reports “client” to “Total Reports”
  • Updated all mailing lists to sort by last name then first name when last names are the same
  • Optimized all reports by verifying them against the new database structure
• Version 3.922
  • Added workstation function to remember last successful user name logged in with
  • Added workstation function to remember last successful server name logged into
  • Added additional workstation error handling to avoid program crashing when attempting to login to the server
  • Added additional workstation error reporting when the user can not connect at workstation login
  • Added three strikes and the program will auto-close
  • Updated SQL installation DLL to report any SQL installation error codes instead of assuming installation failure unless installation failure is absolutely known
• Version 3.920
  • Updated customer entry to allow the store the ability to skip card handout.
  • Skipped members will now be set to scan ID number 2
  • Updated the scan-in process to check for the Scan ID only
  • Multiple members can now have no first name and no last name.  This will no longer cause a scan in problem.
  • Updated to database version 6
  • Updated referral tracking on the client setup screen
  • Added standard referral types as a drop-down selection
  • Allow the employee to manually enter a referral if it is not listed
  • Added an administration option to force employees to enter a referral type for the client
  • Added a Crystal Reports Referral report in the client screen
  • Added a Pie chart to show graphically the percentage of referrals on the crystal report
  • Updated check-in process to now check for referral method
  • Updated customer status screen to require referral information if the administration Force Referral Tracking is on.
  • Updated customer status will only check for Unknown status, no text or one space to be updated
• Version 3.907
  • Fixed uninstallation issue in the case that the program was installed but the software was never run or the database software never installed correctly. Error would not allow the end user to uninstall the software until the database was installed and could then in turn be removed.
  • Added Server or Workstation option to the installation screen
  • User can now choose installation as server or workstation
  • Defaulted Server installation option
  • Resolved minor application exit bugs
  • Added workstation login form
  • The system will request login information when the user starts the workstation program
  • Updated Crystal Reports to allow trusted or untrusted connection to the database
  • Added Server Database configuration screen to the administration area
  • Allow creation and deletion of users who are allowed to access the MiSoft database
  • Workstation users can now be added and removed in the DB-setup area in the administration screen
• Version 3.812
  • Fixed database installation issues that occurred when trying to detect an existing MiSoft database
  • Fixed detection of no SQL database software installed, occurred if the user never installed any Microsoft SQL software
  • Fixed SQL 2005/2000 issues when the database had been completely uninstalled and the end user tries to reinstall the MiSoft software and SQL database.
• Version 3.810
  • Added ability to handle pre-printed cards
  • Added Cards Tab on Administration screen
  • Moved Card creation options to card screen
  • Updated Customer lookup to hide card-reprint when using pre-printed cards
  • Updated Customer Setup screen to ignore printing a card when using pre-printed cards
  • Updated Customer Setup screen to ask for pre-printed barcode tag after you choose to add a new customer
  • Added Pre-printed Barcode request screen
  • Allowed non-entered scan-card to set member to ID zero if the user cancels card entry
  • Updated Customer Setup screen to allow administration override of Scan ID; this allows you to re-assign another card if they loose it, etc.
  • Updated Customer Setup screen to hide Scan ID assignment when printing their own cards
  • Modified Customer database structure to remove identity seed on ScanID field
  • Updated Multiple Stored Procedures to accommodate the new Customer Database ScanID field changes
  • Created a new stored procedure for creating their own cards.
• Version 3.519
  • Corrected an administration screen bug that would allow the user to have “x” number of free visit days and 1 visit after their trial period ended.
  • Corrected a minor bug that would crash the software if the visits box was null. Auto inserts a zero if the visits box is null.
• Version 3.328
  • Updated Customer setup screen, added visual masks for phone & zip
  • Changed versioning method
  • Updated your-logo-goes-here.bmp image
  • Updated MiSoft documentation manual
  • Added Autorun.inf to the MiSoft Deployment for ready to go distribution image
  • Updated General reports company head did not display state abbreviation correctly
  • Updated Global Manual and Intake for change once & done
  • Cleaned Removed any old files from the product solution
  • Updated Welcome to MiSoft.net HTML file
  • Updated Version GUID
• Release 03/19/06
  • Updated Customer setup screen, added visual masks for phone & zip
  • Complete overhaul of cash tender screen
  • Update adjust decimal places and add $ sign to tender_sale screen
  • Added change due screen to summarize the money due back to the customer
  • Enabled Multiple instance application so that someone can open a second instance of the application to check someone in while another instance is being used to add a new customer
  • Added Store ID number to the Biz Administration
  • Resolved problem where the system would change the member's expire date to the current date if they purchased a visits package
  • Added admin override protection to the visit number and charge fee
  • Added make purchase button to Customer Visit screen
  • Changed Customer Setup screen to disallow visits change.  This should be done by deleting a visit from a customer's account
  • Updated Allowed Visits code to allow changes
  • Added validation routine for negative and positive allowed visits remaining
  • Minor Customer_Setup & primary screen form change, removed maximize form option
  • Minor Set splash screen to not be top-most form
  • Minor changed .net configuration to load splash screen inside of application start events so that any message box errors would not be covered up by the splash screen
  • Minor added visual fade effect to Splash Screen Startup
• Release 03/07/06
  • Adjusted the crystal reports to print mailer zips centered instead of right justified
  • Added Printing Margin Control for printing crystal reports
  • Added Administration margin update area on reports tab
  • Updated New Visit code to handle situations where the customer purchases a package while under a date membership.  This allows their date membership to continue and when it runs out the visits packages will start.
  • Updated Admin menu, when using date or 100-year membership the allowed visits first visit number needed to be 1 and not zero to allow for correct membership day counting.  Update required because of new visit updates
  • DB Updates: Margins added to administration, Misc Stored procedure updates for new visits
  • Function Update: Consolidated AllowVisits code
  • Added admin override to customer setup screen.  Allows administrator to change date and number of visits left.
  • Updated & changed loading procedure to allow only a single instance of the application to start, users must close the first instance before starting another instance
• Release 02/13/06
  • Upgraded software to use Microsoft SQL Express 2005 from MSDE 2000
  • Upgraded all routines to .NET 2.0
  • Removed MSDE bootsrapper and replaced with customize MSI installer
  • Reduced package size by using the Microsoft Packed SQL Express 2005 EXE File
  • Upgraded initial splash screen
  • Reduced installation setups and screens
  • Added Registry Key to allow user to change installation location from default without missing file problems
  • Decreased initial installation time by offsetting SQL installation to the first time the user starts the software
  • Initial startup checks for SQL Installation, Instance, Admin functions & re/creates if needed.
  • Added additional diag boxes to help with customer location problems
  • Added user protection in case of software failure the software will exit
  • Added installer prerequisites
  • Installer will now add prerequisites as separate installer items that can be updated individually
  • Updated Administration password screen
  • Updated Administration reports screen
  • Updated crystal reports screen
  • Reduced the number of form changes required to update software
  • Added a custom logo file for reports and ID Cards
  • Added a custom report option so a user can have their own store card w/o the need for a new software rebuild
  • Removed all logos related to other companies
  • Updated blackout on the intake form until approved
• Release 01/17/06
  • Added MiSoft Intake Sheet
  • Added MiSoft Manual
  • Updated Welcome to MiSoft HTM Doc
  • Added/Updated Shortcuts to Program Files\MiSoft
  • Added/Updated Desktop Shortcuts
  • Updated Tech Specs
  • Updated Web Help information
  • Added MiSoft Manual to the website
  • Updated Copyright Information
  • Updated Customer Activity screen anchors
  • Added Control box to Customer Activity Screen
  • Added Report to Customer Activity Screen for printing results
  • Added DOCs folder to the installation CD for quick reference
  • Updated About Us menu with new contact information and Version
  • Added Version to Admin-Other area
  • Added Program Menu on Main Menu for intake sheet printing
  • Added Help! Menu on the Main Menu for quick access to MiSoft Manual
  • Changed EndOfDay Screen to Sizable Menu & removed group tree option
  • Updated Customer SignUp screen to start in center screen
  • Update Pending Expires report to include visits left
  • Update Pending Expires report to show less than 15 days or 5 visits left
  • Added Active Members list
  • Added Inactive members list
  • Added MiSoft ICO to Splash Screen Form
  • Added Admin-option database restore
  • Update wording in screens to better relate software consistency
  • Updated DOCs with latest documentation changes
  • Added Emergency Contact and Phone to Customer Setup
  • Added Drivers License State to Customer setup
  • Updated Customer Setup Screen with additional items and changed layout
  • Updated Backup file name to save as SQL + MMddyyyy_HHmmss + .bak
  • Updated Uninstall backup to save as SQL + MMddyyyy_HHmmss + .bak
• Release 01/10/06
  • Added MiSoft Icon to CD, MiSoft in place of blank CD ico
  • Added Installation CD Auto-start autostart.inf file
  • Updated Primary_Screen name to: Main Menu
  • Added Customer List Complete w/address
  • Added Item List
  • Added Pending Expires list
  • Removed additional lookup button on LookupToSale Screen redundant
  • Added Control box and removed close button to LookupToSale
  • Added Icon to LookupToSale
  • Updated Sales total & change due field to read-only Tender_sale screen
  • Added Complete Mailing list option
  • Added mailing list option to Pending Expires
  • Updated EndOfDay_Screen_DateRange, corrected anchor code to allow full-screen maximize
  • Updated Customer_IDcard, corrected anchor code to allow full-screen maximize
  • Updated Customer_Report_Create, corrected anchor code to allow full-screen maximize
  • Updated EndOfDay_Screen, corrected anchor code to allow full-screen maximize
  • Updated Sales_Receipt_Screen, corrected anchor code to allow full-screen maximize
• Release 01/05/06
  • Updated corner forms logo to (M) MiSoft logo
  • Updated Database installer scripts
• Release 01/03/06
  • Added Birthday notice, when client checks in the computer will tell you if they had a birthday
  • Set Birthday reminder to +/- 7 days from the current day
  • Added End of Day Date Range function in administration to give results by range
  • Added/Updated End of Day report to show date and time range for the report
• Release 12/27/05
  • Removed extra date choice screen from customer activity to reduce click-work.
  • Changed tab order on lookup_account
  • Update Customer Activity to only show results that have visits or new account setups.
  • Update End of Day Report to only show results that have visits, sales or new account setups.
  • Added data conversion routine to convert old data on startup.
  • Updated Reports to use new database structure.
  • Added reports tab to the admin section.
  • Added customer list sorted by date joined, under administration reports screen.
  • Warn end-user if they change company information that they will need a new code.
• Release 11/26/05
  • Resolved minor issue with checking last visit date and prompting to allow
    scanned visit.
  • Auto recall admin data that has not been updated if user rechecks member
    visit/day box.
  • Auto default one check box if nothing is checked.
  • Changed to max of initial membership option for centers that will not perform membership services.
  • Added 100 year membership option for centers that eill not perform membership services.
  • Updated admin screen, removed old text notifications that do not apply.
  • Auto adjust membership end date to first visit date plus admin days when changed.
  • Allow membership date to be updated.
• Release 11/25/05
  • Admin Stored procedure updated; minor changes.
  • Further installation testing, windows XP home now supported.
  • Setup new account after update pulls up last customer that was updated; corrected.
  • Changed allowed visits to visits left.
  • Protect General Sales account from being renamed.
  • compressed administration function.
  • Added Encryption.
  • Released DEMO cd for app testing @ BBC.
  • Changed from font shortcut to font deposit into font folder.
  • Resolved failure of system DLL to be copied on installation to the local system folder.
  • Added system DLL to installer for crystal report barcode functionality.
  • Added Barcode Support for Crystal Reports into installer.
  • Added Barcode fonts into installer.
  • Added Global override password for tech support.
  • Added Demo mode, allow up to 5 users to be added in demo mode.
  • create General_Sales_Account at installation for general non-member sales.
  • resolve printer default selection to always choose something rather than nothing.
  • resolve issue/error if the user does not have any printers installed.
  • database name backup based on date and time for multiple backups in one day.
  • allow installation to a system with an existing misoft database.
  • created backup of db on uninstall of software.
  • resolved installer issues.
  • change the database name to misoftdb on instance misoft.
  • create database backup as user operates database (1st opened).
  • update admin freebie visits code.
  • Auth code checking.
  • Added database versioning checking.
  • Change the way packages are updated when purchased.
  • Fix Problem with membership expiration detection both date and visits have to be out.
  • Notify you if a card has been scanned more than once in the last 14 hours, yes/no to agree.
  • Fix administration item maint, could not add more than 100 days/visits, increased to 1000.
  • Remove the need for a database access file, changed to windows security access level .
  • Review pricing from other software companies and adjust software pricing.
  • Complete initial self installer.
  • Database distribution work; create a self installer for software.
  • Initial Release after phase 3; initial store implementation and testing has been completed zestfully.

• Home
• Products
• Purchase
• Support
• Download
• Testimonials
• Contact